Twist Drill Bit (Auger Carpenter Drill Bit) - 10mm to 35mm
Twist Drill Bit (Auger Carpenter Drill Bit) - 10mm to 35mm
Twist Drill Bit (Auger Carpenter Drill Bit) - 10mm to 35mm
Twist Drill Bit (Auger Carpenter Drill Bit) - 10mm to 35mm
Twist Drill Bit (Auger Carpenter Drill Bit) - 10mm to 35mm
Twist Drill Bit (Auger Carpenter Drill Bit) - 10mm to 35mm
Twist Drill Bit (Auger Carpenter Drill Bit) - 10mm to 35mm
Twist Drill Bit (Auger Carpenter Drill Bit) - 10mm to 35mm
Twist Drill Bit (Auger Carpenter Drill Bit) - 10mm to 35mm
Twist Drill Bit (Auger Carpenter Drill Bit) - 10mm to 35mm
Twist Drill Bit (Auger Carpenter Drill Bit) - 10mm to 35mm
Twist Drill Bit (Auger Carpenter Drill Bit) - 10mm to 35mm
Twist Drill Bit (Auger Carpenter Drill Bit) - 10mm to 35mm
Twist Drill Bit (Auger Carpenter Drill Bit) - 10mm to 35mm
Twist Drill Bit (Auger Carpenter Drill Bit) - 10mm to 35mm
Twist Drill Bit (Auger Carpenter Drill Bit) - 10mm to 35mm
Twist Drill Bit (Auger Carpenter Drill Bit) - 10mm to 35mm
Twist Drill Bit (Auger Carpenter Drill Bit) - 10mm to 35mm
Twist Drill Bit (Auger Carpenter Drill Bit) - 10mm to 35mm
Twist Drill Bit (Auger Carpenter Drill Bit) - 10mm to 35mm
Twist Drill Bit (Auger Carpenter Drill Bit) - 10mm to 35mm

    Twist Drill Bit (Auger Carpenter Drill Bit) - 10mm to 35mm

    $ 29.95 $ 59.95
    Shipping calculated at checkout.
      DESCRIPTION
      • The fastest boring bits ever!
        • These are sharp and sturdy bits designed to bore into softwoods quickly. The design is an improvement over spade and auger bits.
      • According to our test, these upgrade drill bit
        • 10 times faster than standard spade for boring hole!
        • 4 times faster than standard auger drill bits for removing chip!
      • Aggressive Bits:
        • These are aggressive bits that are designed for drilling through softwoods like pine, cedar, fir, or spruce, the type of woods typically used in residential framing.
        • These drill bits could be quickly pulled into the wood without having to apply much pressure.
      • Screw Tip Self-feed & Self-centering Design:
        • The precision cut lead screw pulls the bit straight and true through material.
      • 4 Flutes Design:
        • Designed for 4 precision ground cutting edges and 4 flutes engineered to optimize performance, smooth starts, fast cuts and smooth holes and easy for chip removing.
      Specification:
      • Material: Fully Heat Treated High Carbon Steel
      • Shank: 1/4"(6.35mm) Hex Shank
      • Number of Flutes: 4
      • Tip Type: Self-Feeding & Self-centering Screw Tip
      • Recommended Speeds:
        • Size 10-20mm=RPM 1500-200
        • Size 22-25mm=RPM 1000-1500
        • Size 28-35mm=RPM <1300
      Note:
      • DO NOT attempt to dig with this drill bit going at full speed. Unlike a spade bit where the faster the blade is going the smoother it'll get started, you should try to start relatively slow with this.
      • For charging electric drill, it should be more than 48V, and if use hand electric drill, it should be more than 500W, or it will drill might be stuck.
      • Please allow 1-3mm error due to manual measurement.
      • Due to the difference between different monitors, the picture may not reflect the actual color of the item.
      Package includes:
      • 1 Pc x Reaming Drill Bit
        REVIEWS

        RELATED PRODUCTS

        BACK TO TOP